Seeking Xenon flash making principles.
2015/12/15 view:
I
beg Xenon flash production principle and method steps, I was a layman,
these do not know, so every step in detail, the required elements, the
role of so talk clearly, to fill-light camera. Requires
flash time in one second or less, no harm to the human eye, the flash
can reach one second intervals at least once, one second can flash three
best. Reference
works: Xenon flash principle: through the camera contact is triggered
by a transformer, in an instant will rise to 20,000 volts 12V power than
high-voltage pulse voltage to start the xenon bulb xenon gas in the arc
generated 6000K - 10000K Strong light color temperature, color was white in the slightly purplish blue crystal diamond. When
you press the shutter, the shutter back a signal to the CPU, while, CPU
synchronous trigger a control signal to the transistor output circuit,
the flash. Then
the transistor is turned on, the trigger capacitor begins to discharge,
producing a pulse current in the transformer primary, the transformer
secondary currents generate nearly 4000v high pressure, stimulate the
internal hernia flash ionization and conduction. Make instant energy storage capacitor discharges through the flash tube into light, to complete a flash.
Xenon flash, also known as high-intensity gas discharge flash. Xenon flash from the xenon bulb, ballast and insulation transformer wire composition, the use of special xenon gas in ultra-high voltage state firing discharge.
Xenon flash, also known as high-intensity gas discharge flash. Xenon flash from the xenon bulb, ballast and insulation transformer wire composition, the use of special xenon gas in ultra-high voltage state firing discharge.
- Pre： Flash pulsed dye laser pump 2015/12/15
- Next：Difference Xenon flash and LED 2015/12/15